Custom Shape Cushion — Clipped Corner, Any Size & Fabric

Some benches have to work around something. A banquette turns a corner past a wall return, a window seat runs into an angled wall, or a bench has to clear a chimney breast or a post. A plain rectangle either hits the obstruction or leaves the seat short.

A Custom Clipped-Corner Cushion solves it. The shape is a rectangle with one corner cut off at an angle, cut to your exact dimensions so the clipped corner clears the wall or post while the rest of the seat stays full.

Why customers choose us:

• Exact fit: we cut the clipped corner to your angle so the cushion clears the obstruction with no gap
• Seat and back together: order matching pieces so the whole bench lines up
• Foam that lasts: choose the density for light seating or daily use
• YKK zipper covers: removable covers that unzip for easy cleaning
• Indoor or outdoor: easy-clean fabric for a kitchen banquette, performance fabric for a porch bench

How to Measure a Clipped-Corner Cushion

Measure the bottom edge and the top edge, then the height on the full uncut side and the shorter height on the clipped side. The angled corner is calculated from those. Add the thickness you want. Note which corner is clipped so we build it on the correct side. If the shape is unusual, trace it on kraft paper and send us the template.

You May Also Like:

• custom hexagon bay window cushion
• custom parallelogram cushion
• custom bench cushion

A Custom Notched Cushion is a rectangle with one corner cut off at an angle. It fits benches that have to work around a wall return, a post, or a chimney, where a square cushion would run into the obstruction. You give us the two widths and the two heights, and we cut the notch on the right side.

Perfect for:

• Kitchen banquette cushions that clip a corner to clear a wall or doorway
• Corner bench cushions where one end meets an angled wall
• Breakfast nook seats that wrap past a cabinet or column
• Bench cushions that clear a chimney breast or a boxed-in post
• Window seat cushions where one back corner hits an angled wall
• Any built-in bench that needs one corner trimmed to fit

Order it as a seat, a back, or both. Tell us which corner is cut, and we build the notch on the correct side.

This cushion fits any bench or seat where three corners are square and one is cut off at an angle. If your seat is mostly rectangular but one corner has to clear a wall return, a post, a column, or a chimney breast, the notched shape matches it. To confirm the fit, measure the bottom width, the top width, the full side height, and the shorter notched side height, and note which corner is cut. It can be made as a seat, a back, or both, indoors or outdoors depending on the fabric.

A notched cushion is most often a kitchen banquette or a built-in bench, so the fabric catalogue leans toward easy-clean indoor weaves, with outdoor options for porches. The right cloth depends on where the bench lives.

All fabrics are:

• Stain and spill resistant, a real help on a kitchen or dining banquette
• Easy to wipe clean, or unzip the cover and machine wash it
• Fade resistant for a banquette next to a sunny window
• Built to take daily sitting without thinning at the notched corner
• Offered in a wide range of solids and patterns to match cabinets and walls

For a kitchen or dining banquette, choose a stain-resistant easy-clean weave or faux leather. For a covered porch bench, ask for a water-resistant performance fabric instead.