Coussins pour camping-cars et caravanes

Custom RV Cushions and Camper Cushion Replacements for Every Area

RV and camper cushions take more wear than most home furniture. Replacing your RV cushions is one of the quickest ways to give your motorhome a visual boost — and one of the most practical, since factory foam compresses quickly under daily travel conditions. The problem is that RV seating rarely matches standard dimensions: dinette booths, U-shaped banquettes, jackknife sofas, and cab-over bunk areas all have non-standard depths, widths, and corner configurations that off-the-shelf cushions cannot cover. A custom RV cushion cut from your exact measurements restores comfort and fit without replacing the furniture frame.

This collection covers every major seating area inside an RV or camper: general camper seat cushions and back sets, dinette booth cushions, U-shaped dinette configurations, full camper cushions replacement sets, and cover-only options for frames where the foam is still good. Each product page is built around a specific RV seating type so you can find the right option without guessing.

Browse by RV Cushion Type

• Custom RV/Camper Seat Cushion — the general-purpose custom RV cushion for any camper seat, bunk, or cab-over area that needs a made-to-measure replacement in moisture-resistant fabric and high-density foam.
• RV Camper Seat and Back Cushions — custom seat and back cushion sets for RV benches, camper couch and jackknife sofas, and booth seating where both pieces need to match in thickness, fabric, and density.
• RV & Camper Sofa Cushions — custom cushions for RV and camper sofas, including jackknife sleeper sofas, cut to your exact seat and back sizes so the set sits flush and folds flat.
• RV Dinette Cushions — custom dinette cushions for RV booth seating cut to your exact bench length and seat depth, with fabric options rated for the humidity and temperature swings inside a parked camper.
• RV U-Shaped Dinette Cushions — cut to fit U-shaped and curved RV dinette configurations where straight rectangular cushions leave gaps at the corner turns and end sections.
• Pop-Up Camper Cushions — custom bunk and dinette cushions for pop-up and tent trailer campers, built to your fold-down camper's exact sizes in moisture-resistant fabric.
• Camper Cushion Replacement — a full replacement camper cushion set for any RV or trailer where the original foam has compressed, the fabric has worn through, or the cushions need to be replaced after years of road use.
• Custom RV Cushions — made-to-measure cushions for motorhomes, travel trailers, fifth wheels, and camper vans covering any seating area where standard dimensions do not apply.
• RV Dinette Cushion Covers — replacement covers only for RV dinette cushions where the foam is still in good condition but the original cover has worn, faded, or been damaged.
• RV & Camper Cushion Cover Replacement — camper seat, back, and couch cushion cover replacements sewn to your exact size when the foam is still good but the original fabric has worn out.

Fabric Options for RV and Camper Cushions

RV interiors are a difficult environment for cushion fabric. If you bring kids or pets on trips, a durable outdoor fabric holds up to mess far better than a fancier upholstery fabric — and removable covers that can be taken off and washed are worth prioritizing for any RV cushion. Moisture-resistant performance fabric is the standard choice for dinette and seating areas that experience condensation, temperature swings, and spills during travel. Sunbrella fabrics carry a five-year warranty against fading and stretching and are soft enough for extended indoor use while providing the durability RV seating requires. Vinyl is another practical option for high-contact areas where waterproof wipe-clean performance matters more than softness. All covers at uscushion.com include a removable YKK zipper so the fabric can be washed or replaced without touching the foam.

Foam for RV and Camper Cushions

High-density foam is recommended for camper cushions as it provides the comfort and support needed for seat and back cushions and is designed for longevity. For the dinette area, a thickness range of 2 to 6 inches is recommended — thicker cushions deliver better comfort for extended sitting and sleeping use. For cushions that will be used as bedding, a foam topper layer adds comfort on top of a firmer base; for dinette seats used primarily for sitting, a firmer polyurethane foam holds its shape better through daily use on the road. Custom foam type, density, and thickness are available on every product page in this collection.

RV & Camper Cushion FAQs

How many cushions do I need for my RV dinette?
It depends on your layout. A straight dinette usually needs 2 to 4 pieces (two seat bases and two backs), while a U-shaped booth typically takes 5 to 7 pieces once the corner and end sections are counted. Measure each seating and back section separately, since RV dinettes rarely use uniform sizes.

Can I order custom RV cushions in a non-standard size?
Yes. Every product in this collection is cut to your exact measurements — length, width, and thickness — so U-shaped booths, jackknife sofas, cab-over bunks, and odd corner sections all get a proper fit instead of an off-the-shelf approximation.

What foam should I choose for camper cushions?
High-density polyurethane foam is the standard choice for RV seat and back cushions because it holds its shape under daily travel use. For dinette seats that double as a sleeping surface, a 4-inch or thicker foam in a firmer density gives better support. Foam type, density, and thickness are selectable on every product page.

How long does a custom RV cushion order take?
Custom RV and camper cushions typically ship in 14 to 18 days, since each order is cut and sewn to your measurements. Every cushion comes with a removable YKK zipper cover and free shipping.