TL;DR: For a standard two-person RV dinette booth, you need 4 cushions total: 2 seat cushions and 2 back cushions. When ordering from uscushion.com, that means ordering quantity 2 (each set includes 1 seat + 1 back). U-shaped dinettes need more. You can also order seat and back cushions separately. This guide breaks down every common dinette layout so you know exactly what to order before you start.
This is the question we get more than any other.
Someone lands on our product page, starts entering dimensions, and then pauses. The form asks for a seat cushion size and a back cushion size. But it's not clear whether ordering once gets you both pieces for one seat, or covers the whole dinette.
So they write in: "Is the pricing for 1 set or for 2 sets as needed for a dinette?" And then the next customer asks the same thing. And the one after that.
We hear this so often that we decided to write the definitive answer. If you're trying to figure out how many RV dinette cushions to order, here's everything you need to know.
What Does "Quantity 1" Actually Include?
When you order quantity 1 from uscushion.com, you get 1 seat cushion and 1 back cushion. That's one complete set for one seat position, two pieces total.
This covers one person's spot at the dinette: the flat part you sit on, and the upright part you lean against. Both are custom-made to the dimensions you provide. Both come in the fabric and color you choose.
It does not cover the full dinette. For that, you need to know how many seat positions your layout has.
How Many Cushions for a Standard 2-Person Booth Dinette?
A standard RV booth dinette seats two people: one on each side of a fixed table. This is the most common setup in travel trailers, fifth wheels, and Class A motorhomes.
For this layout, you need quantity 2, which gives you:
- 2 seat cushions (one for each side)
- 2 back cushions (one for each side)
- 4 pieces total
Both sides of a booth dinette usually have the same dimensions, so ordering quantity 2 with a single set of measurements works perfectly. If your two sides are different sizes for any reason, just reach out before ordering and we'll sort it out.
A typical 2-person booth set at uscushion.com runs around $214, based on standard dimensions. Larger sizes (like 44-inch long benches) run closer to $636 for the full set of 4 pieces.
What About L-Shaped and U-Shaped Dinettes?
L-shaped and U-shaped dinettes are more complex. Each section has its own dimensions, and the corner pieces can be tricky to measure.
L-shaped dinette: Usually 3 cushion sets (6 pieces total), though this varies. One long bench, one shorter bench at a right angle, and sometimes a corner seat piece. Measure each section separately.
U-shaped dinette: Typically 4 to 7 sets depending on size, with each of the three sides requiring its own dimensions. One of our customers, Kathy from Colorado, had a 7-piece U-shaped setup. She sketched out her layout by hand, sent us the drawing with measurements labeled, and we converted that into a production diagram before cutting anything. Her full set came to $744.
For any L-shape or U-shape, the best approach is to send us a photo or a rough sketch with measurements. We'll draw up a confirmation diagram so you can see exactly what we're making before we start.
Can I Order Just Seat Cushions Without the Backs?
Yes, and it's more common than you'd think.
Some RV dinette benches sit against a solid wall, so there's no back cushion needed at all. Others have backs attached to the RV structure rather than separate cushions. A few customers just want to replace the seat cushions because the backs are still in good shape.
You can order seat cushions and back cushions completely separately at uscushion.com. Just specify what you need when you place your order, or send us a message first and we'll set it up correctly.
One customer from Alaska, Tom, wrote in saying: "Just need the cushions, no backs." Simple. We made them without the backs and he got exactly what he needed.
The Covers-Only Option: When You Just Need New Fabric
If your foam is still firm and supportive, you don't need to replace the whole cushion. You can order custom covers only, keep your existing foam, and just get a fresh outer layer in a new fabric and color.
This is a popular option for customers whose original vinyl covers have started to peel or crack. The foam underneath is often still perfectly good. One customer from Florida ordered 4 covers (2 seat, 2 back) in a turquoise indoor fabric with a non-slip bottom. Total cost: $256.80. The dinette looked brand new without replacing a single piece of foam.
For covers-only orders, the piece count works the same way. A 2-person booth dinette still needs 4 covers.
Quick Reference: Dinette Type to Cushion Count
Here's a simple guide based on the most common RV dinette layouts:
| Dinette type | Seat positions | Cushion sets (qty) | Total pieces |
|---|---|---|---|
| 2-person booth | 2 | 2 | 4 |
| Single bench (no back) | 1 | 1 seat only | 1 |
| L-shaped | 3–4 | 3–4 | 6–8 |
| U-shaped | 3–7 | 3–7 | 6–14 |
| Corner banquette | varies | measure each section | varies |
These are estimates. The actual count depends on your specific RV model and how many separate cushion sections you have. When in doubt, count the number of distinct bench sections and multiply by 2 (one seat, one back per section). Then subtract any sections that don't have a back cushion.
How to Order the Right Amount
Before you order, take five minutes to do this:
- Count how many separate bench sections your dinette has
- Note which sections have back cushions and which don't
- Measure each section: length, width, and thickness (for the seat), and length, height, and thickness (for the back)
- Check if any sections are different sizes from each other
If your dinette has rounded corners, an unusual shape, or sections that connect at an angle, take a photo and send it to us. We'll draw a confirmation sketch before production so there are no surprises. You can also check our RV cushion measuring guide for step-by-step instructions.
Once you have your measurements and piece count, head to the RV and camper cushion page and enter your dimensions. The price calculator will show you the total for each set. Multiply by the number of sets you need, or just message us and we'll put together a quote.
Conclusion
The short answer: a standard 2-person RV booth dinette needs 4 cushions, ordered as quantity 2. Each set includes 1 seat cushion and 1 back cushion.
For anything more complex (L-shape, U-shape, or unusual layouts), count your bench sections, measure each one separately, and send us a photo if you're not sure. We do this every day and we're happy to help you figure out the right count before you place the order.
Ready to get started? Browse our RV cushion options and enter your dimensions, or message us directly and we'll put together an exact quote for your dinette layout. Most custom orders ship in 14 to 18 days.
Frequently Asked Questions
How many cushions do I need for a 4-person RV dinette? A 4-person booth dinette (two people on each side) still uses the same 4-cushion setup as a 2-person booth: 2 seat cushions and 2 back cushions. The difference is size, not piece count. Each bench is longer to accommodate two people sitting side by side. Measure the full length of each bench, enter that as your cushion length, and order quantity 2 as usual.
What's the difference between a seat cushion and a back cushion? The seat cushion is the flat, horizontal piece you sit on. The back cushion is the vertical piece you lean against. They're made differently: seat cushions are typically thicker (3 to 4 inches) and use denser foam to support body weight, while back cushions are thinner and sized for height rather than depth. When you order a set (quantity 1), you get one of each.
Can I order different quantities of seat and back cushions? Yes. If you only need seat cushions (because your backs are fixed to the wall, for example), you can order seats only. If you only need backs, same thing. Just message us before ordering so we can set it up correctly and make sure you're not paying for pieces you don't need.
My RV has a corner piece in the dinette. Does that count as a cushion? It depends on the design. Some RV corner pieces are solid (built into the structure), so no cushion is needed there. Others have a separate triangular or wedge-shaped seat cushion. If your corner has a cushion, measure it separately and add it to your order. A photo of the corner helps us confirm the shape before we cut anything.
How much does a full RV dinette cushion set cost? Prices vary based on size, fabric, and options like piping or non-slip bottoms. As a reference: a standard 2-person booth set (4 cushions at typical dimensions) runs around $200 to $640 depending on the size of each bench. A 7-piece U-shaped set runs around $744. Covers-only orders for 4 pieces run around $257. Get an exact quote by entering your dimensions into the product page calculator.
